| Summary: | Serial Console stops displaying at "Starting kernel" on RPi4B | ||
|---|---|---|---|
| Product: | IPFire | Reporter: | Jon <jon.murphy> |
| Component: | --- | Assignee: | Arne.F <arne.fitzenreiter> |
| Status: | ASSIGNED --- | QA Contact: | |
| Severity: | - Unknown - | ||
| Priority: | - Unknown - | CC: | michael.tremer |
| Version: | 2 | ||
| Hardware: | unspecified | ||
| OS: | Unspecified | ||
| Attachments: | screenshot of log (incomplete) | ||
I believe this one is for Arne. Created attachment 1139 [details]
screenshot of log (incomplete)
The first post was an update from CU 172 to CU 173. This post is a new CU 713 download and build.
Similar errors as first post.
|
During a boot with the serial console, the serial console stops displaying at "Starting kernel". The RPi4b seems to boot OK but the serial console does not work. ``` [root@ipfireRPi4B9 ~]# cat /boot/uENV.txt KVER=6.1.11 DTBSUNXI=sun8i-h3-nanopi-r1.dtb root_dev=UUID=1234567.... SERIAL-CONSOLE=ON [root@ipfireRPi4B9 ~]# cat /boot/config.txt . . . enable_uart=1 . . . hdmi_safe=1 ``` ``` U-Boot 2022.10 (Dec 27 2022 - 13:59:35 +0000) RPi4 - IPFire.org DRAM: 3.9 GiB RPI 4 Model B (0xc03111) Core: 205 devices, 16 uclasses, devicetree: board MMC: mmcnr@7e300000: 1, mmc@7e340000: 0 Loading Environment from FAT... *** Warning - bad CRC, using default environment In: serial Out: vidconsole Err: vidconsole Net: eth0: ethernet@7d580000 PCIe BRCM: link up, 5.0 Gbps x1 (SSC) starting USB... Bus xhci_pci: Register 5000420 NbrPorts 5 Starting the controller USB XHCI 1.00 scanning bus xhci_pci for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr 2824 bytes read in 10 ms (275.4 KiB/s) ## Executing script at 02400000 113 bytes read in 7 ms (15.6 KiB/s) Load uEnv.txt... ... Set console to ttyAMA0,115200n8 27265536 bytes read in 1222 ms (21.3 MiB/s) 27434 bytes read in 22 ms (1.2 MiB/s) 16139829 bytes read in 693 ms (22.2 MiB/s) Ramdisk loaded... Unknown command 'bootz' - try 'help' Moving Image from 0x80000 to 0x200000, end=1cf0000 ## Loading init Ramdisk from Legacy Image at 02700000 ... Image Name: Image Type: AArch64 Linux RAMDisk Image (lzma compressed) Data Size: 16139765 Bytes = 15.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 02600000 Booting using the fdt blob at 0x2600000 Loading Device Tree to 000000003df2c000, end 000000003df35b29 ... OK Starting kernel ... ``` Tested with: Raspberry Pi 4 Model B Rev 1.1 IPFire 2.27 (aarch64) - Core-Update 173